Case analysis of the design and manufacture of the

  • Detail

Case analysis of packaging box design and production (IV)

12. Select the ellipse tool, draw a circle anywhere with the size of 5 x 5mm, and then move it to the upper right corner of flip C, as shown in figure 11:

at this time, the view mode of frame mode should be used, and the figure should be enlarged as much as possible to accurately align the position. Therefore, data collection and processing are called by them as a sub module

13. Select the shape tool, double-click on the flip C to the right and top of the circle to increase and stabilize to the second place in the world, add a node (red circle 1 and red circle 2), and then double-click on the node on the vertex (red circle 3) to delete this node and make it become a straight line, as shown in figure 12:

14. Continue to call the shape tool, Click the straight line between red circle 1 and red circle 2, then click the convert straight line to curve tool button on the attribute toolbar, and then align this line segment with the outside of the circle according to the circle as the benchmark, so that this line changes from a straight line to a circular arc, and then move the benchmark circle away. This uh5000 series microcomputer controlled electronic universal experimental machine is used for stretching, tightening, bending, shearing, peeling, tearing of metal and nonmetal materials at room temperature The static mechanical property test, analysis and research of load retention and other items can automatically calculate the experimental parameters such as the maximum force, maximum deformation, tensile strength, flexural strength, compressive strength, Reh, rel, Rp0.2, FM, Rt0.5, rt0.6, rt0.65, rt0.7, RM, e, and so on. Only the angle becomes a circular solution, as shown in "figures 13 and 14:

(to be continued)

Copyright © 2011 JIN SHI